Upgrade your KA24DE by replacing the expensive OEM IACV with a more affordable and widely available LS-style idle air control valve. This kit is designed to simplify your setup while improving serviceability and parts availability. It allows you to eliminate the factory IACV and run a 5/8" ID hose directly to your charge pipe or intake. For improved routing and cleaner installation, the hose inlet has been relocated to the top of the valve rather than the OEM bottom position (see product photos). What’s Included: IACV adapter Laser-cut mounting hardware 1/4" to 5/8" barb fitting 90° 1/4" NPT fitting LS-style IACV Important Notes: Wiring pigtail for the LS IACV is not included and must be sourced separately A standalone ECU is required for proper operation This is a stepper motor valve and requires a 4-wire setup Fits 91-99 240sx ka24de 23781-53F12 Built to order, 1-2 week lead time.

LS-Style IACV To Ka24de Conversion Kit

Default

Precision 3D-scanned for a perfect fit, this seal is specifically engineered to close the gap between the Sur-Ron Ultra Bee AXON controller and the aftermarket SXS skid plate. It delivers reliable protection against mud, water, and debris while keeping your electronics secure. Made from tough, flexible TPU, it provides a snug yet forgiving fit that installs quickly and stays firmly in place. Integrated metal inserts prevent bolt pressure from crushing the TPU, ensuring long-term durability and performance. Compatible only with the AXON controller and SXS skid plate setup.

Surron Ultra Bee AXON / SXS Skid plate mud deflector

Replace the factory fuel hat wire pass through with a simple, reliable stud-style solution. This 4-piece kit uses insulated M5 hardware with nylon washers to safely pass power through the fuel hat without allowing the terminals to contact the metal fuel hat and short out. Fits the Nissan 240SX fuel hat and many other fuel hats with similar designs. Installation requires drilling each mounting hole to 8.5 mm to 9 mm. Perfect for custom fuel pump wiring, dual pump setups, or replacing damaged factory electrical pass-throughs.

Fuel Hat Electrical Pass Through Stud Kit

Upgrade your interior with a clean, OEM-style volt meter designed specifically for the Nissan 240SX coin tray location behind the steering wheel. This custom piece replaces the factory coin tray with a sleek integrated digital voltage display, giving you real-time system voltage monitoring without cluttering your dash. Built with a premium textured finish to match the factory interior feel, this volt meter blends seamlessly into the cockpit while adding a modern performance look. The bright LED display is easy to read day or night, making it perfect for monitoring charging system health, battery condition, and electrical performance at a glance. Features: Direct-fit replacement for factory coin tray Bright, easy-to-read LED voltage display OEM-inspired textured finish Clean integrated appearance Ideal for modified or turbocharged setups Helps monitor alternator and battery performance in real time Installation:This unit requires wiring to a switched 12V ignition power source and ground for operation. Basic wiring knowledge is recommended. Connector kit comes with both ends male and female. Perfect for S13 enthusiasts looking for a subtle but functional interior upgrade.

240SX S13 Coin Tray Voltage Display

Get a cold air intake built specifically for your vehicle, not a universal kit that only comes close. Whether you're looking for an enclosed airbox or an open filter design, every intake is custom engineered to fit your engine bay while providing a clean installation and professional appearance. Service Availability This service is currently available for customers in the Austin, TX area, where we can perform a full 3D scan of your engine bay. If you're located outside the Austin area, we can still complete your project if you're able to provide a high quality 3D scan of your engine bay. If you're unsure whether your scan will work, feel free to contact us before placing your order. What's Included Custom intake design for your vehicle 3D scanning of your engine bay (Austin, TX area only) CAD modeling and engineering Manufacturing using high temperature engineering grade materials All required couplers, clamps, and hardware for installation Final inspection before delivery How It Works Place your order to reserve your build slot. After your order is placed, we'll contact you using the email address provided at checkout to discuss your vehicle, modifications, intake goals, and any other details needed for your project. If you're local to the Austin, TX area, we'll schedule a time to 3D scan your engine bay. If you're outside the area, you'll need to provide a high quality 3D scan of your engine bay before the design process can begin. We'll design your intake in CAD, manufacture your intake, and keep you updated throughout the process. Once your intake is complete, we'll send your final invoice. After the remaining balance is paid, your intake will be shipped or made available for pickup. Pricing The payment made at checkout is a deposit only and reserves your project in our build queue. Custom intake packages start at $599, including all required parts and materials. Final pricing is determined by the complexity of your application, vehicle, and design requirements. Factors such as engine swaps, custom airboxes, unique routing, additional features, or more involved engineering may increase the final cost. Once we've reviewed your vehicle information and project details, we'll provide a final quote. The remaining balance will be invoiced before your intake is shipped or made available for pickup. Questions? If you have any questions before placing your order or would like to discuss your project first, feel free to contact us. We're happy to help determine the best solution for your build.

Latest designs

LS-Style IACV To Ka24de Conversion Kit

Surron Ultra Bee AXON / SXS Skid plate mud deflector

Fuel Hat Electrical Pass Through Stud Kit

240SX S13 Coin Tray Voltage Display

Custom Air Intake